Prezzo: 58,99€
(Aug 14, 2025 14:25:19 UTC – Dettagli: )
Attention
1. VTX Power: Higher VTX power consumes more energy and generates more heat, reducing flight time. For better flight time in indoor scenarios, use 25~100mW power.
2. Motor Wiring: Only soldering is supported for motor wiring on the flight control. Avoid terminal plugging.
3. VTX Antenna: Connect and install the image transmission antenna before powering on the flight control. Alternatively, set transmission power to 0 to avoid burn out.
Specification of FC
Weight: 2.9g (4IN1 Version)
Mounting Hole Size: 26mm x 26mm
CPU: STM32G473CEU6 (168MHz)
Six-Axis: ICM42688P (SPI connection)
Blackbox Memory: 16MB
Sensor: Voltage&Current
5V BEC: 5V 3A
USB Port: SH1.0 4-Pin
Built-in ESC with 5A continuous
4IN1 Version: FC+ESC+OSD+VTX
Specification of ESC
Input Voltage: 1S
FC Firmware Version: Betaflight_4.5.0_BETAFPVG473
ESC Firmware: A_X_5_96KHz_V0.19.hex for BB51 Bluejay hardware
Signal Support: D-shot300, D-shot600
Specification of VTX
Output Power: 25/100/200/400/PIT
Frequency: 5.8GHz 48 channels, with Raceband: 5658~5917MHz
Channel SEL: SmartAudio2.0
Modulation Type: FM
Frequency Control: PLL
All Harmonic: Max -50dBm
Frequency Stability: ±100KHz (Typ.)
Frequency Precision: ±200KHz (Typ.)
Channel Carrier Error: ±1.5dB
Antenna Port: 50 Ω
Operating Temperature: -10℃~+80℃
Recommend Parts
Drones: Air65, Air75
Frames: Air65, Air75, Meteor65, Meteor65 Pro, Meteor75 Pro
Motors: 0702/0702SE, 0802/0802SE, 1102
Receiver: ELRS Lite Receiver, ELRS Nano Receiver
Package
1 * Air Brushless Flight Controller – 4IN1 Version
1 * Type-C to SH1.0 Adapter
1 * SH1.0 4Pin Adapter Cable
1 * 5.8g VTX Antenna
1 * BT2.0 U Whoop Cable Pigtail | 40mm
4 * M1.4*4 Self-tapping Screws
4 * Shock Absorbing Ball
Air Brushless Flight Controller, the first 1S FC that utilizes the G473 processor, experienced a remarkable 55% increase in computing speed and lightning-fast response times for precise racing and complex freestyle maneuvers, surpassing the F411
Higher integration yet lightweight design, featuring a custom miniature OSD chip. Weighing only 2.9g (4IN1 Version), it offers extra UART port options for effortless function expansions, adapting flawlessly to any flight scenario
Default integrated onboard 25-400 VTX. Streamlines installation saves space, reduces weight, and boosts convenience for VTX and FC adjustments
Elevate your drone’s precision with the industry-leading ICM42688P gyro, integrated accelerometer, cutting-edge sensor calibration, and filtering algorithms, and a sample rate of up to 8K, which takes the drone’s posture and movement accurate and precise drone to the next level
Unlock extensive flight data recording and analysis with an impressive up to 16MB capacity black box. Maximize performance and diagnose faults effectively, leveraging the full potential of your drone
