Price: 00.00
(as of Mar 10, 2020 17:29:58 UTC – Details)
BETAFPV Beta75 Tiny Whoop Quadcopter F4 FC Frsky Receiver Z02 Camera with OSD Smart Audio 7X20 Motor for Tiny Whoop Racing
2 Improvements
Frsky Receiver:F3 FC -> F4 FC SPI Frsky OSD – The latest BETAFPV F4 brushed FC has upgraded firmware to Betaflight 3.4.1, SPI Frsky D16(Default Configuration) connection works in this F4 flight controller.
Cam: Z01 Cam -> Z02 Cam – This Z02 FPV Camera is customized for Micro FPV quadcopter like Tiny Whoop etc. Support the SmartAudio function and adjustable output power, has wide lens angle of 100 to 120 Degrees with 1/4 lens.
Binding Procedure
The binding procedure is reversed as usual. No need to click the bind button when power on.
Power on the board, either by connecting the battery or USB power. Then the green receiver LED start to flash.
The second step, click the bind button for 3s. Then the green receiver LED will be solid on. This means that the receiver is in bind mode and you could start to bind your radio transmitter.
For detailed procedure of binding, please check the here: https://betafpv.freshdesk.com/support/solutions/articles/27000021366-how-to-bind-your-radio-transmitter-brushed-fc-board
Specification
Wheelbase: 75mm
Weight: 38g (without battery)
Flight Controller: F4 Brushed FC SPI Frsky with OSD-UK:www.amazon.it/dp/B07DMDZ1LH
Firmware Version: Betaflight MATEKF411RX 3.4.0
Motor: 7x20mm Coreless Brushed Motor, 17500KV-www.amazon.it/dp/B071VT6XHV
Receiver: Frsky D16 potocol
Camera: Z02 Camera -www.amazon.it/dp/B07FNRLFGZ
Batterry: 260mAh Lipo HV battery with PowerWhoop connector -www.amazon.it/dp/B07121V7MB/
Flight time: 3 minutes 30 seconds
Package Included:
1 * Beta75 BNF SPI Frsky OSD
1 * 260mAh 1S Lipo HV BatteryUpgraded on the FC: F3 Frsky FC ->F4 Frsky FC. The default configuration from factory is Frsky D16 mode (FRSKY_X). Built in Frsky receiver is compatible with Taranis, Taranis Plus, X9E, Horus X12S, XJT Modules. In Betaflight Configuration, it should be setted as FRSKY_D receiver (aka Frsky D8 mode) or FRSKY_X receiver (aka Frsky D16 mode) in SPI RX mode.
This is a SPI Frsky receiver. Binding easier than before, no need to click the bind button when power on. Guidance of Binding: https://betafpv.freshdesk.com/support/solutions/articles/27000021366-how-to-bind-your-radio-transmitter-brushed-fc-board
The same hole pattern with Tiny Whoop flight controller. More punch on throttle with 7x20mm motors and 3-blade 40mm propellers.
The struts between the motor mounts and ducts are fragile and break easily. So these upgraded frames stiffen the struts considerably. The struts have a flat cross section which creates more bonding area with the duct.
Here is a guide for EU-LBT radio controller users if you can’t bind to F4 FC (SPI Frsky Receiver): http://support.betafpv.com/support/solutions/articles/27000051569-can-t-bind-to-f4-fc-spi-frsky-receiver-a-guide-for-eu-lbt-radio-controller-users